Post Views: 270
![](https://shulchanaruchharav.com/wp-content/uploads/2023/12/amazon-1-e1701849855534.png)
WhatsApp
Telegram
Facebook
Twitter
Shevi’i
- Making the Olah altar:
- He made the Olah altar from shittim-acacia wood. It was made into a square, its length being five Amos, and its width also being five Amos. It was three Amos high. It was hollow. He made horns on each of its four corners, and he covered [the entire altar] with copper.
- Its accessories: He made for it pots to remove its ashes, shovels, sprinkling basins, prongs, and fire-pans. It was all made of copper.
- Its netting: He made a copper netting which encompasses the altar and welded four copper rings on each of its four corners. He made poles of acacia-shittim wood and covered them with copper. He inserted them into the rings for the altar to be carried.
- Making the Kiyor:
- He made a copper Kiyor sink and pedestal using the mirrors of the women who congregated at the entrance of the Ohel Moed.
- Making the Chatzer/courtyard:
- He made a courtyard for the Mishkan from twisted linen. The curtains of the northern and southern side of the Chatzer were 100 Amos long. The curtains of the western side were 50 Amos long. The curtains of the eastern side were 15 Amos for each end.
- The pillars: There were twenty pillars and twenty sockets for the northern and southern side, and ten pillars and ten sockets for the western side. There were three pillars and sockets for each end of the eastern side, for a total of six. All the pillars were made with silver hooks and belts and their top was coated with silver. The sockets were made of copper.
- The entrance to the Chatzer: The screen of the gate of the Chatzer was made of Turquoise Ticheiles wool, Argamon-Purple wool, scarlet wool, and twisted linen and was 20 Amos long and 5 Amos in height. It contained four pillars and four copper sockets and had silver hooks and belts, and the pillars were coated with silver.
- Its accessories: The pegs of the Mishkan were all made of copper.
Leave A Comment?
You must be logged in to post a comment.